← Back to Shop

Air Miner HVAC Integration

Route mining heat through your ventilation — warm every room

Overview: Air miner → Heat recovery ventilation → Warm air to every room

How It Works

An air-cooled Bitcoin miner produces a lot of heat when it runs. Instead of blowing this heat into the room or venting it outside, you can route it directly into your ventilation system — turning waste heat into whole-home heating.

Technical Solution

• Place the miner near your ventilation unit — typically in the attic, utility room, or technical closet
• Connect a duct or flex hose from the miner's exhaust fans into the heat recovery ventilator (HRV)
• The HRV receives the hot air and distributes it evenly through the house's ventilation channels to all rooms
• The warm air mixes with fresh incoming air, giving you both fresh ventilation and heating at the same time

It's essentially a form of heat recovery where the miner becomes your dedicated heat source.

Benefits

• Nearly 100% heat efficiency — almost all energy going to the miner heats your home
• Even, comfortable temperature — no need for extra panel heaters or radiators
• Good air quality — the ventilation system spreads heat while providing fresh air circulation
• Easy setup — especially if you already have balanced ventilation with heat recovery (HRV/ERV)
• Adjustable power — typically 1–4 kW depending on the miner and how much noise you can tolerate
• Summer flexibility — divert the hot air outside when heating isn't needed